Hyundai Wia announces rollout of F500PLUS and L230 series

Following the introduction of the newly developed KF5600 machining center and the KL2300 series turning machine, Hyundai Wia will start the run-out of the F500PLUS and the L230 series this year. Until the end of 2019, Dymato, the Dutch dealer for Hyundai Wia, will supply both models at a special run-out price. Because the F500PLUS machining centers and the L230series turning machines are in stock in Hamburg, the machines can also be delivered very quickly.

True bestsellers

Thanks to the success of the F500PLUS and L230 series, production of both models has continued in full swing after the introduction of the new successors. "Both machines are true bestsellers," said Theo Coffeng, managing director of Dymato. "Of the F500PLUS the Korean machine builder has delivered as many as 4,457 worldwide and of the L230 series a total of 1,169 have been put into service." Both machines score well when it comes to high reliability and low maintenance costs. "This was an important reason for many Dymato customers to expand their machine fleet with several machines from these series."

Robust machining center

The F500PLUS is a robust three-axis machining center that pairs high accuracy with great dynamics. The machine guarantees high stability with minimum thermal effects. All linear axes have double-bearing large-diameter ball screws driven by servomotors. On the F500PLUS, the table has a size of 500 mm x 1200 mm and is suitable for workpieces with a mass of up to 800 kg. The machine's machining range is 1060 mm x 510 mm x 635 mm (XxYxZ), with rapid speeds of up to 36 m/min (30 m/min for the Z axis).

High accuracy and productivity

The L230 series turning machine is also distinguished by the combination of high accuracy and high productivity. All linear axes feature large-diameter ball screws with double bearings and driven by servomotors. The L230 series has a machining range of up to Ø 310 mm x 521 mm and has twelve positions for (driven) tools with stable BMT-55P take-up, with options for both straight and angle milling heads. The driven tools have a maximum power of 3.7 kW at speeds up to 5,000 min-1. Indexing time is only 0.2 s. A Fanuc or Siemens control can be selected with this turning machine.

Excellent follow-up

Both the KL2300series turning machine and the KF5600 machining center are very good successors to its predecessors. The KF5600 has a larger size table than the F500PLUS, namely a 560 mm x 1,250 mm table. The machining center is suitable for workpieces of considerably greater weight, namely up to as much as 1,000 kg. Also, the KF5600 is Hyundai-Wia's first machine that is also optionally available with Heidenhain control. The KL2300 series differs from the L230 series in that the power and torque has increased to a maximum of 18.5 kW and 353Nm. The turret is more robust for larger drill bit holders. Reliability and accuracy have also been considered. For example, the rib structure of the bed has been reanalyzed and improved and the spindle drive has been changed.

The walk-out promotion for the Hyundai Wia F500PLUS and the Hyundai Wia L230 series runs through December 31, 2019. More information about the promotion can be found at www.dymato.nl/najaarsactieOr can be requested from Dymato resource info@dymato.nlor by phone at 0318-550800.